Cat Brooch

Materials

1 8mm jump ring
5 head pins
1 25mm setting
1 25mm cat cameo
5 6mm Czech fire-polish beads
Flat-nose pliers
Round-nose pliers
Wire cutters
E6000

Materials are available at wwww.beadsonline.com.au

Technique

1. Take your 25mm brass setting and using your E6000 glue the cat cameo.

2. Create five fire-polish beaded dangles by taking 5 x head pins and place on each head pin 1 x 6mm Czech fire-polish bead. Trim 1cm from the bead and create a loop.

3. Take 1 x 8mm jump ring and thread the top loop of the brass setting (step 1) and the 5 x fire-polish beaded dangles (step 2) and the bottom loop of the brooch back